PA1T's antenna farm.  

General

The antennas at PA1T are mounted in 3 crank up towers all 18 meters high. The rotators in tower 1 and 2 are from Prosistel, type PST71. The rotator in tower 3 is a 3 fase motor.

For 160, 80 and 40 I am using a V160s from Titanex.

An R8 vertical from Cushcraft is also in use. For receving I am using 3 beverages and a k9AY loop.

More overview

   
Tower 1

A force 12 C31xr is in use for 10 meter (7el) 15 meter (4el) and 20 meter (3el).

For 50mhz is a 7 element (10 meter boom)
Design Johan PF7M (ex PA7MH)

A 3band vertical for local talk is on top of the tower.

More tower 1 pictures

Tower 2

A Force-12 EF-240 is in use for 40 meter.
For the WARC bands a Force-12 WARC-7 is in use.

A 2 band vertical is in use for the packet cluster system.

More tower 2 pictures

Tower 3

Tower 3 is the VHF UHF tower.

For 144 MHz 4 5wl M2 antennas are in use.(10.5m boom).

For 432 MHz 2 stacked 23 element Cue Dee yagis do the job. For 23cm and 13cm a 1.2 meter dish is in use.

More tower 3 pictures

Low bands

For 160 mter 80 mter and 40 meter I use a V160s from Titanex using elevated radials. One for 160 meters, two for 80 meter and two for 40 meters.

The vertical is just right from the middle.

Receiving antenna's

For the low bands I use 3 beverage antenna's.
A K9AY loop completes the receive antenna's.

 

 

4 square 80 meters

During contests as the CQ World Wide and the Dutch PACC I am able to put up a 4 square antenna for 80 meters.

Unfortunately the local comunity leaders does not like it and it's only up during these contests.......

Yes that's the Netherlands in 2004.

 

Multiplier antenna

An Optibeam yagi is in use during the contests as multiplier antenna.